Check SAN/DAS connectivity

Connect a PC/Laptop by a cross cable to the ethernet outlet of the fiber switch
Set on this system a IP address in the range of the fiber switch. For example 10.77.77.76/24
Open a browser and go to address http://10.77.77.77
Click in the left down on the icon "Zone Administration"
If not done yet, click on 'Alias'
Press the button 'Create' and enter an alias name.
Unfold the 'Member Selection List'
Select the item that you want to put together and press 'Add Member'
Select the tabulation 'Zone'
Click on the button 'Create' and provide the zone name.

When done, press 'OK'
Unfold 'Member Selection List'
Select the members you want and press 'Add Member'
Click on the tabulation 'Config'
Press on the button 'Create' and provide the config name

When done, press 'OK'
Unfold 'Member Selection List'
Select the members you want and press 'Add Member'
Go to Actions - Save Config Only
Save Config - Press Yes to save
This will take a time to complet. Don't do anything until this is successfully committed.
Go to Actions - Enable Config
Select the configuration you want to enable and press 'OK'
Enable Config Name - Press Yes to enable this config
Result screen. Note that 'Enabled Config' is now "Redconfig" (the one we selected)

Useful tools

The following tools are very useful for having an overview of the installation:

SAN Visibility Tool
Free-of-charge tool designed to help with better design, administer, and manage Storage Area Networks(SAN).
Here
HP StorageWorks SAN Designer v1.0
HP StorageWorks SAN Designer is a simple and easy to use tool to design a Storage Area Network (SAN).
Here

	Home \| Table of Contents \| Overview Map \| Icon Legend
	Installation of SQL Cluster
	Daniel Paessens ega@paessens.org